UH-18SP Modifications


Exhaust modification. A few pictures of our exhaust modification that we did over the winter. We added a cross hover or H pipe to the exhaust which is supposed to produce a little more power and smooth out the engine a little bit.
Trailer modifications Picture of the homemade PVC rollers we put down the sides of the trailer to make loading and unloading the UH-18sp easier on our fly on, fly off trailer.
Choke OPPS, We were in such a hurry we to get the 18sp done we forgot to hook up the choke. Here are a few pics.
Windshield wiper After taking the 18sp out a couple times we relized that we needed a windshield wiper, here are a few pics of our setup.
Cockpit enclosure. We made a cockpit enclosure out of 1/2" conduit and thick clear vinyl too keep the spray off of us on cool days.
Idler/tensioner. We added an belt idler/tensioner to the thurst belt so we could adjust the belt tension easier.
Air Cleaner We modified the subaru air cleaner so the intake and air filter were under the seat, so we wouldn't be sucking in any water.



- Home - About Zach Bell - Hovercrafting - Wood Working - V8 Beetle Resource - Other Projects - Videos - Contact Me -



Copyright © 2011, Zach Bell - ALL RIGHTS RESERVED.