Construction of Our Homebuilt UH-18SP Hovercraft

Control surfaces for the UH-18spw and UH-18sp	Pictures of the control surfaces for both the 18spw and 18sp.
Hull	Pictures of the UH-18sp foam and plywood hull being built.
Lift duct	Pictures of the lift duct being installed in the nose of the hovercraft.
UH-18sp Cockpit	The 1/8" plywood cockpit being put on the UH-18sp hovercraft hull.
Battery and Batt. Box	Pictures of the the battery we are using and the battery box cut into the nose of the hovercraft, just in front of the lift duct.
Thrust duct.	Construction of our Foam/Glass/plywood thrust duct for the 18sp hovercraft.
Engine	Pictures of the EA-82 Subaru engine we got for the 18sp.
Engine mount	Pictures of our engine mount For our EA-82 Subaru engine.
Seat/belt cover	Our UH-18sp seat and belt cover.
Thrust and lift system	Pictures of the thrust and lift systems for our UH-18sp single engine hovercraft.
Controls	The Joystick and cable and pulley controls for the 18sp.
Skirt	Pictures of the skirt being made and installed on the 18sp.
Exhaust system	The Exhaust system on our subaru ea-82 hovercraft engine.
Windshield and Roof	The Windshield and Roof made from conduit, plywood, and polycarbonate.
Electrical	Pictures of the Electrical system for our UH-18sp Hovercraft.
Fuel system	See the fuel system for our ea-82 subaru engine.
Radiator	Pictures of the Radiator for our EA-82 subaru engine.
Throttle	Our Bike brake throttle setup on the UH-18sp
Guards	Pictures of the Gaurds on the thrust and lift ducts
Paint	Painting our 18sp hovercraft to make it look fast sitting still..
Trailer	Pictures of the trailer we modified for the 18sp.
The cost of our UH-18sp	This is where you can see how much we spent on our 18sp. PRICING FROM 2002
The cost of our lift system	This is where you can see how much we have spent on the lift system compaired to a dual engine craft. PRICING FROM 2002
vacuum bagging	These are pictures of us testing our vacuum bagger